Rule 1100 GPH Bilge Pump (69 L/min) 12V

This totally submersible 1100GPH bilge pump features a water cooled, ignition and TCO protected motor, stainless steel shaft and snap-on strainer base.

It’s extremely efficient, offering a low current draw and high-capacity output in a very compact housing, to fit into the smallest available space.

This pump requires a Rule float switch to operate automatically (sold separately – see related products). Please note that using the included check valve will reduce the output fl ow of the pump.

Product Features:

• Fully submersible pump – 1100 US gallons per hour – 69 litres per minute
• Higher flow – optimised impeller to provide greater flow at the same amperages previous model.
• High efficiency, low amp draw ignition protected motor includes true Electromagnetic suppression (EMC)
• 16-gauge tin coated copper electrical wiring with silicone infused water blocking feature – to stop water wicking down inside the wiring
• In-built thermal cut-out (TCO) in the motor provides additional protection for pump & vessel.
• Backflow prevention – now includes a removable check valve in the discharge nozzle which reduces the amount of water draining back from the pump discharge hose into the bilge.
• Please note – using the check valve will reduce the rated output flow.
• Threaded discharge port – gives easier installation and maintenance.
• Discharge hose port is included with each pump.
• Hidden air vents in the pump prevent air locking in challenging plumbing installations and helps with the check valve operation.
• Compact – 112mm Height x 74mm Width x 64mm depth – not including discharge.
• 3.7 amp draw @ 12v DC.
• Straight threaded hose outlets for both 25mm (1”) and 28mm (1 1/8”) hose